2-Stroke Motor Oil, self-mixing 250ml
High-grade, semi-synthetic 2-stroke motor oil for use in all 2-stroke engines. Assures reliable operation of the engine and maximizes the operating life. Self-mixing. Selected mineral and synthetic base oils in combination with state-of-the-art additive technology permit residue-free combustion to keep the engine clean. The engine is optimally protected against wear.
For separate and mixture lubrication in motorcycles, mopeds, lawnmowers, chainsaws and emergency power units. Mixing ratio up to 1:50.
Application
For mixture lubrication, pour contents of can into fuel tank. Add fuel according to mixing ratio and mixing will follow automatically. For separate lubrication, pour the contents of the can into the oil tank. Oil is mixed with fuel via the metering device.
Central Hydraulic System Oil
LIQUI MOLY central hydraulic system oils meet the highest technical requirements and are suitable for a wide range of automotive applications. The carefully selected formulations made from the best raw materials ensure excellent temperature properties and guarantee the full function of the systems even at the lowest temperatures of up to –45 °C. All central hydraulic system oils are impressive thanks to excellent wear, aging and corrosion protection as well as optimum friction values and minimal foaming tendency.
This synthetic hydraulic fluid with ash-free additives is ideally suited for steering systems, electro-hydraulic convertible tops, level controls, hydropneumatic suspensions, damping systems, cab tilting devices, etc.
Application
The specifications and instructions from the assembly or vehicle manufacturer must be followed. This oil can also be used for refilling in systems. Optimum effect only when the product is used unmixed.
Hybrid Additive
A combination of agents, developed specifically for late model hybrid engines. Removes deposits in the fuel system and protects against corrosion. Stabilizes the fuel and protects against aging and oxidation. Diminished fuel degradation allows better engine performance and efficiency.
250ML
Hypoid Gear Oil (GL4/5) TDL SAE 75W-90
Semi-synthetic hypoid gear oil with extremely high performance reserves. Outstanding aging stability. Ensures assemblies function perfectly, even under extreme operating conditions and when exposed to large temperature fluctuations. Minimizes wear. Outstanding viscosity-temperature properties. Allows long oil change intervals.
Specially developed for use in commercial vehicles. Universally applicable TDL oil (total drive line) for manual, auxiliary and differential transmissions with limited slip differential. Note the vehicle or unit manufacturer’s instructions.
Application
The operating instructions of the vehicle and transmission manufacturers must be followed.
Hypoid Gear Oil (GL5) LS SAE 85W-90 1L
Mineral-based hypoid gear oil. For vehicles with proven transmission technology. Ensures assemblies function perfectly, even under extreme operating conditions and when exposed to large temperature fluctuations. Ensures a stable lubricating film. Offers high lubrication reliability and optimal wear protection. Outstanding viscosity-temperature properties.
For high-load axle drives with and without limited slip differential, especially for vehicles in which an oil with limited slip (LS) additives is stipulated by the unit or vehicle manufacturer. Note the vehicle or unit manufacturer’s instructions.
Application
The operating instructions of the vehicle and transmission manufacturers must be followed.
Hypoid Gear Oil (GL5) SAE 80W
Mineral-based hypoid gear oil. For vehicles with proven transmission technology. Guarantees maximum safety reserves under critical operating conditions. Provides a stable lubricating film and minimizes wear.
For high-load vehicle transmissions without limited slip differential, particularly axle drives with hypoid gearing. Note the vehicle or unit manufacturer’s instructions.
Application
During selection, keep to the viscosity class stipulated by the transmission manufacturer. Mixable with all branded gear oils. Full effectiveness only when used unmixed. Only use in manual transmissions for which API GL 5 oils have been stipulated.
LIQUI MOLY 1019 MOTOR CLEAN Oil Additive
Highly effective additive combination for the effective removal of soiling on the inside of the engine before the oil change. Dissolves oil residues and deposits, envelops dirt particles and transports them out of the oil circuit when the waste oil is drained. The fresh oil can then deliver its full performance in the cleaned engine. This ensures rapid oil penetration, optimal engine performance, minimized wear and reduced exhaust emissions.
Suitable for all commercially available motor oils in gasoline and diesel engines with and without a particulate filter (DPF/GPF). Can be safely used in vehicles with toothed belt running in oil. Not suitable for motorcycles with a wet clutch. 500 ml is sufficient for up to 5 l of oil. Tested for use with catalytic converters and turbochargers.
Application
500Â ml is sufficient for up to 5Â l of oil. Add to motor oil at operating temperature before an oil change. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with all commercially available motor oils.
LIQUI MOLY 5L Top Tec 4200 5W-30 New Generation
Top Tec 4200 5W-30 New Generation
LIQUI MOLY ATF III 1L
Automatic transmission fluid with high performance reserves. For vehicles with proven transmission technology. Outstanding protection against wear and good friction characteristics. Guarantees perfect operation of hydraulic transmissions even under extreme operating conditions and when exposed to large temperature fluctuations. Provides extremely good lubrication properties and outstanding corrosion protection. Good seal compatibility.
For automatic transmissions, manual transmissions, steering systems, hydraulic systems and auxiliary drives in both passenger cars and commercial vehicles. Usage according to the prescribed specifications from the unit or vehicle and transmission manufacturers.
Application
Operating requirements of the vehicle, transmission and hydraulic system manufacturers must be followed.
LIQUI MOLY ATF III 5L
Automatic transmission fluid with high performance reserves. For vehicles with proven transmission technology. Outstanding protection against wear and good friction characteristics. Guarantees perfect operation of hydraulic transmissions even under extreme operating conditions and when exposed to large temperature fluctuations. Provides extremely good lubrication properties and outstanding corrosion protection. Good seal compatibility.
For automatic transmissions, manual transmissions, steering systems, hydraulic systems and auxiliary drives in both passenger cars and commercial vehicles. Usage according to the prescribed specifications from the unit or vehicle and transmission manufacturers.
Application
Operating requirements of the vehicle, transmission and hydraulic system manufacturers must be followed.
LIQUI MOLY Cera Tec SKU: 3721 300 ml
-
- excellent high and low temperature behavior
- chemically inert
- suitable for diesel particulate filters
- increases smooth operation
- stable under extreme pressures
- compatible with fine filters
- highest thermal stability
- no deposits
- long engine service life
- miscible with all commercially available motor oils
- reduces fuel consumption
- reduces frictional losses
- tested for turbochargers and catalytic converters
LIQUI MOLY Copper Spray
Release agent and lubricant made from ultra-fine copper particles for use with machine elements subject to high thermal stress. Makes dismantling easy after long running times. Is used for screw connections and interfaces exposed to high temperatures, high pressures and corrosive elements. Operating temperature range: –30 °C to +1,100 °C
For lubrication and corrosion protection of connections subject to high thermal stress in the chemical and petrochemical industries, power stations, the ceramics industry, engineering and vehicle construction, particularly for screw connections on exhaust manifolds, silencers, chassis components.